Features of SP Panel Tank
A water tank combined with the advantages
of stainless steel tank and POLYTHENE SMC panel!
-
01
- Strength resistance
- By forming Stainless Panel, the pressure solidity of panel is enhanced, and it is possible to construct tanks bigger than
6m, because floor panel, side plate and internal enforcing angle are welded and
assembled.
-
02
- Confidentiality
- Unlike blots assembly type panel tank
using packing, panel and panel are welded
for assembly to prevent the water leakage while in use.
-
03
- Cleanliness
- It is hygieic, because UV can't penetrate
and bog moss can't grow.
-
04
- Durability
- Secured against extermal shock or the fire. Designed by considering resistant to vibration and chock.
-
05
- Corrosion resistance
- For the prevention of corrosion of the
ceiling panel due to chlorine gas and Stainless Panel itself, ceiling panel construction is made of SMC. And to discharge chlorine gas which is stagnent at the top of the upper part, on the side panel in contact with upper air layer, air vent is installed for the prevention of corrosion.(Patent No. -453772)
-
06
- Economics
- It's inexpensive compares with bolt assembly type SMC and with bolt assembly type STS 444, and the panel can be recycled.
Standards of SP PANEL TANK
- Thickness of SP panel by height
- The thickness of the material for SP-panel tank varies according to the height of construction and the construction is made of SMC PANEL.
-
01.Bottom and side panel
-
02.Side / Ceiling panel(Panel with installed air vent)
-
03.Top Panel
Channel 1.0m, 1.5m, 2.0m 3.0m, 3.5m, 4.0m, 4.5m : 100 x 50 x 5.0T
5.0m, 5.5m : 125 x 65 x 6.0T
6.0m : 150 x 75 x 6.5T -
04.Thickness by the height and base frame Height Thickness Channel
SP Panel Tank detail plan
Vent detail plan
